-
Address: 440056, Penza,
Pushkari street, 43 -
Purpose
Installation, fixation, rotation and movement of the cylinder during testing.
The product is used to complete the benches during the inspection of compressed gas cylinders.
Construction
■ The product is a frame with wheels, on which the gripper, lifting mechanism and turning mechanism are installed
■ The cylinder under test is fixed in the gripper with screws
■ The product allows to hold the cylinder in any position, rotate (tilt), as well as move (transport) it
■ Rotation of the gripper with the cylinder is carrying out by turning the handwheel
■ The lifting of the gripper with the cylinder is carried out using a manual cable winch
■ Rear-mounted swivel wheels are equipped with brakes
|
Parameters |
Value |
|
Diameter of the installed cylinder*, mm |
108…377 |
|
Length of the installed cylinder*, mm |
400…2100 |
|
Gripper rotary angle, deg |
0…360 |
|
Lifting capacity, kg |
500 |
|
Cylinder fixation in the gripping device |
manual using the screws |
|
Rotation of the gripping device with the cylinder |
manual using a reducer |
|
Lifting of the gripping device with the cylinder |
manual using a cable winch |
