Purpose
Drying the inner surface of cylinders after hydrotesting
Construction
■ The work of the bench is based on the supply of dry hot air under pressure into the space of the gas cylinder
■ The bench is a base of a modular design, on which cylinders with the neck down and an air heating device are installed. The basic version of the bench is for four cylinders
■ The installation of the tested cylinder on the bench is carried out using a lifting mechanism or a mobile tilter
■ The construction of the bench is specified for condensate removal formed during drying
■ The intensity of hot air supply to each cylinder is regulated independently
■ The air heating device is selected depending on the volume and number of simultaneously installed cylinders
■ For the operation of the bench, it is necessary to have a source of compressed air with a pressure of 0.6 ... 0.8 MPa and the connection to a sewerage system
Parameters |
Value |
Gas type in the cylinder |
compressed |
Diameter of the installed cylinder*, mm |
108...377 |
Length of the installed cylinder*, mm |
400...2100 |
Pump power supply parameters, V/Hz | 220/50 |
Air temperature at heating unit output, °C |
60...90 |