-
Address: 440056, Penza,
Pushkari street, 43 -
Purpose
Gas cylinders degassing and valve demounting from the cylinder neck
Construction
■ The main function of the bench is the degassing of the cylinder through displacing of the remaining gas by supplying of an inert gas to the test cylinder
■ The bench is a base on which a stand with a pneumatic wrench is installed and there is a place provided for installing and fixing of the cylinder with an inert gas
■ Installation and fixation of the tested cylinder is carried out using a stand with a tilter or a mobile tilter
■ The degassing device is mounted on the inert gas cylinder valve
■ The supply of inert gas to the degassing cylinder is regulated by a gas regulator
■ The dismantling of the valve from the neck of the cylinder is carried out using a pneumatic wrench
■ The bench is completed with a set of adapters for dismantling of various construction valves
■ Inert gas cylinder is not included as the component of a complete delivery
■ For the operation of a pneumatic wrench, it is necessary to have a source of compressed air with a pressure of 0.6 ... 0.8 MPa
| Parameters | Value |
|
Gas type in the cylinder |
compressed |
|
Diameter of the placed cylinder*, mm |
400…2100 |
|
Length of the placed cylinder*, mm |
108…377 |
|
Wrench |
manual pneumatic impact |
|
Torque on the output shaft, max, N·m |
2000 |
|
Compressed air consumption, m3/min |
1,1 |
|
Inert gas pressure at the inlet, max, MPa |
20,0 |
| Working pressure during degassing, max, MPa | 0,4 |
