Device for branch joint with an electric drive ST-UV-E
Purpose
■ branch joint into the existing process pipeline under product pressure
(transported medium) with preservation of tightness by tie-in
■ the tie-in process is carried out by cutting of a hole through
pre-welded to the pipe branch pipe with fl ange and a fl ange-mounted
gate valve (ball valve)
■ branch joint is carried out by an electric drive
Purpose area
■ repair and installation of pipelines for various purposes
■ the device is used in the fi eld environment, on industrial objects.
Climatic category NF1
■ ensures that there is no need for preliminary pipeline shutdown
Working environment in the pipeline
■ oil
■ gas
■ steam
■ water
Specifications
Parameters
|
1E
|
2E
|
3E
|
3EВ
|
Maximum pressure in the cut pipeline, MPa
|
6,3
|
Diameter of the cut pipeline, mm
|
45-1420
|
Maximum wall thickness of the cut pipeline,mm
|
22
|
Range of use DN
|
20; 25; 25; 32; 40; 50; 65; 80; 100
|
50; 65; 80; 100; 125; 150; 200
|
65; 80; 100; 125; 150; 200; 250; 300
|
100; 125; 150; 200; 250; 300; 350; 400; 500
|
Tool stroke without refi xing, mm
|
100
|
120
|
140
|
155
|
Maximum assembly length of bend-gate valve-adapter, mm
|
500
|
900
|
1300
|
2400
|
Rotation drive power of the cutting tool, kW
|
1,3
|
2,2
|
3,0
|
Spindle rotation, rpm
|
100 / 300
|
22,5
|
18
|
Cutter feed
|
manual
|
Explosion protection
|
not available
|
1ExdIIBT4
|
Branch joints can be equipped with a pneumatic drive
The technical characteristics and the image of the equipment are for informational purposes only and can be changed according to the specifi cations of the customer