Bench for relief valves testing SPTE 2-1P
Purpose
Simplified bench for input and periodic hydro - and pneumatic relief
valve tests:
■ on readiness for operation after storage and transportation
■ to check the tightness of the valve
■ to adjust the relief valves to the operation pressure
Type of connection
■ flanged
■ true union*
*at the customer’s request
Testing medium
■ water of purity class not lower than 7 in accordance wint GOST 17216
2001
■ compressed air of class 7 in accordance with GOST 17433 80
Construction
■ the bench is small in size and weight, therefore can be used as a
mobile testing equipment and move directly to the test site
■ pressure supply to the outlet pipe
■ quick and easy clamping of products
■ the bench consists of a foundation plate and clamps
■ fixation takes place by pressing of the mounting flange to the
clamps with the lower table
■ equipped with a high-precision pressure gauge to ensure a test
control
The bench can be equipped with a manual hydraulic pump from 4 to 25
MPa
Specifications
Parameters
|
Value
|
Range of nominal diameter of the tested valves, mm
|
10...200
|
Test pressure range, MPa
|
до 16,0
|
Maximum diameter of the flange of the installed valves, mm
|
410
|
Maximum thickness of the flange of the installed valves, mm
|
55
|
The maximum force perceiving by the bench, tf
|
20
|
Applicability table
The technical characteristics and the image of the equipment are for informational purposes only and can be changed according to the specifications of the customer