Lapping test bench SPTE-3-1/2
Purpose
■ for grinding and lapping fl at seals of housing and wedge surfaces of
gate valves of DN 8 - DN 300 mm
Advantages
■ the bench is equipped with two lapping tables made of high quality
cast iron, which gives a multiple capacity increase : one table with
an adjustable tilt, second table is rotating for horizontal surfaces
■ clean surface treatment of housings and wedges or spools
■ minimal time consumption during the tool changeover and process
control
■ high performance and maintainability
■ automatic mode of products machining using speed control and
timer
■ digital device for setting of the exact angle
■ a wide range of areas to be treated
■ ergonomics in process control
■ the adjustable angle of inclination of the XY table allows to machine
the sealing surfaces of valves with diff erent angles of the wedge
chamber
Specifications
Parameters
|
Value
|
Range of use, mm
|
8...300
|
Maximum diameter of the valve fl ange installed on the table, mm
|
500
|
Maximum face-to-face length of valves installed on the table, mm
|
700
|
Maximum weight of installed components, kg
|
500
|
Dimensions of the working surface of the inclined table, mm
|
500х50
|
Table tilt angle, degrees
|
0...12
|
Dimensions of the working surface of the rotating table, mm
|
500
|
Table rotation rate
|
2...20
|
Spindle speed, rpm
|
10...280
|
Power consumption, kW
|
2
|
Power supply, V / Hz
|
380/50
|
Overall dimensions, mm
|
1800х1200х2600
|
Weight, kg
|
1300
|
The technical characteristics and the image of the equipment are for informational purposes only and can be changed according to the specifi cations of the customer