Automated system for electroarc welding SPTE EW
Purpose
For mechanical repair surface welding with solid wire of sealing surfaces:
■ wedges
■ gate valve housing
■ valve housing
■ valve housings and spools
Principle of operation
■ the surfacing process is automatic
■ the installation can be performed as with a rotating die and rotating
table
■ the consumption of the surfacing wire depends on the diameter and
wear of valves
■ the unit is completed with a power source for the arc
■ operation in the protective gases medium or under a layer of flux
■ table tilt – 0°, 5°, 10°
Advantages
■ eliminates the need for special training through the automating of
the operation
■ quality of preparation and the surfacing process conducting allow the
absence of splashes, overheating of parts
■ use of a surfacing installation in the shielding gas medium is safe due
to the use of a forced cooling automatic system of the welding tool
■ all this allows to increase the service life of the tool, makes the
process reliable, safe, and technologically perfect
Specifications
Parameters
|
EW-1
|
EW-2
|
EW-2-1
|
EW-3
|
Welding current, А
|
50… 500
|
Surfacing wire diameter, mm
|
1,6…4
|
2…5
|
2…5
|
2…5
|
Changing of wire feed rate
|
stepped
|
Rotation speed changing of the faceplate / die
|
continuous
|
Range of use by surfacing DN, valve gate housing (wedge), mm
|
50…200
|
50…600
|
50…600
|
200…800
|
Range of use by surfacing DN, valve housing (spool), mm
|
40…200
|
Rotation object
|
product
|
product
|
die
|
product
|
Overall dimensions, mm
|
1680
1400
2400
|
1880
1900
2700
|
1200
1250
3375
|
2200
1600
3275
|
Weight (installation, power supply, control panel), kg
|
700; 300; 100
|
850; 300; 100
|
1130; 300; 100
|
700; 300; 100
|
The technical characteristics and the image of the equipment are for informational purposes only and can be changed according to the specifications of the customer