Benches for relief valves testing SPTE 2-1, SPTE 2-2
Purpose
Bench for input and periodic hydro - and pneumatic relief valve tests:
■ on readiness for operation after storage and transportation
■ to check the tightness of the valve
■ to adjust the relief valves to the operation pressure
Type of connection
■ flanged
■ nipple joint*
■ threaded*
■ true union*
*at the customer’s request
Testing medium
■ drinking water in accordance with GOST R 54232-98
■ air of class 7 GOST 17433-80
Test control
■ visual: by the leakage indicator
■ tool: according to the indication of manometers
■ computer measuring and recording system
Construction
■ the bench is designed for quick and easy clamping of products
■ the pressure is supplied through the outlet pipe
■ the bench consists of a frame and movable clamps, which move
with a special handle
■ fixing is done by the clamping of the mounting flange between
the clamp and the table
■ the bench is equipped with a foot pedal for convenience of the
valves pre-fixing
■ control of the hydraulic system of the bench does not require a
separate control panel
Specifications
Parameters
|
Maximum diameter of the flange of the installed valves, mm
|
Maximum thickness of the flange of the installed valves, mm
|
The maximum force perceiving by the bench, tf
|
SPTE-2-1-350/56
|
530
|
80
|
56
|
SPTE-2-2-400/75
|
660
|
80
|
75
|
Таблицы применяемости
SPTE 2-1-350/56 SPTE 2-2-400/75

The technical characteristics and the image of the equipment are for informational purposes only and can be changed according to the specifications of the customer